Typewriter Story on NBC Tonight...Probably

Michelle Melnick form NBC called me today with some good news. If NBC Nightly News isn't shortened because of a hockey game, then her story about typewriters should air tonight. I know she filmed my class, but she was also at MTE (Mesa Typewriter Exchange) and spent some time with Bill. If you happen to be near a TV check it out.

Tough break. When it's typewriters vs. bomb-sniffing dogs the bomb-sniffing dogs will always get the airtime. 

A Taste of the Typosphere's Future

As I go along I have been sipping from the Future of the Typosphere essays as one would drink a fine cordial. Every new thing I read makes me feel that the Typosphere is one of the most learned and thoughtful groups on the internet.

10 or X or What?

I have a Royal desktop standard machine with single glass sides from 1927. It's a beautiful machine and I am really proud to own it, but I have a problem.

I don't know what to call this model. Is it a Royal 10? Should we designate that it's a single beveled window rather than the dual window? Royal 10 Single Window?

Should I follow the convention and use the letter prefix from the serial number? In this case it is X-1089085, so this would be a Royal X.

Or maybe 1927 Royal Standard? What do you, the Typosphere, think?

Angering the Typewriters

So after lofty promises and Greek-drama-sized hubris, the USB typewriter project has come to a halt. The mounting point I imagined just won't work and I am starting to question the wisdom of using my Underwood. Mostly because the rear feet are too squished and are providing almost no clearance for the sensor bar. 

While the mount point I picked was beautiful and it made some sense, I was unprepared for how much it would affect the feel of the movement. Stopping the intermediate linkage even a few millimeters made the whole machine unresponsive. I am beginning to see why the ribbon vibrator bar was a wise choice on Jack's part. The vibrator bar is a piece that interacts with every key bar, yet has movement so as to prevent any major alteration to the feel of the typewriter.

You win some and then you loose some.

I guess that the Ancient Ones of the Typosphere looked unfavorable on my enterprise. Yet, like Herbert West I shall reanimate this idea.

For Nick and All Typospherians

15 March 2020 Update: I think this link went dead. I have adjusted it.

Nick emailed me and asked if I would be willing to scan the instruction sheet for a Royal Portable Model O. Happy to help the Typosphere. I scanned it and made two versions. The first version is for printing on 11x17" paper and folding to your heart's desire. The second is for on-line viewing.

I've also run off a few copies and folded them for you. They are for sale (via this blog) for $1 including postage.

Typewriter Hacks

When I think of typewriter hacks I think of:

or:

But folks of the digital world that are hooking up typewriters to computers. I haven't decided whether it's a silly idea, as expressed by Strikethru, or something fun as Robert has described. That vacillation hasn't stopped me from giving the USB typewriter kit by Jack Zylkin a go. A few days ago I posted the main board assembled, soldered, and tested. I have a few other pieces to assemble, but my big hang-up was the location of the sensor bar.

As Jack shows on his Instructables page, the sensor bar is attached to the ribbon vibrator cross-member. The reason why he chose this location makes sense. Each key top linkage arm touches this bar and there is a significant amount of play in the trip point. In other words, this is a pretty good place to put a part like this. However, I did not like this location.

The fact I would be mounting something to a moving part made me nervous. I know that most of these typewriter USB conversions use this cross-member, I thought there are plenty of places under the machine to mount a new cross-bar and mount the sensors to that place. This is the location I thought wold be ideal:

So, I went to she shop and started to craft this of aluminum:

And then covered it with Gorilla Tape.

Unfortunately, I didn't take step-by-step photos, but I think you can get an idea of how I crafted it. The curved edge approaches the secondary linkage segment behind the key tops. These small linkages descend only slightly and the clearance is small, but it's enough to make contact with the metal fingers and short to ground. I wanted to mount the sensor bar on the inside of this support bar, but I think the clearance just isn't there.

The great thing about Jack's kit is that's open. You can make the decisions for yourself and go wherever the wind might take you. I decided to make a new crossbar tof my own design that honored my aesthetic sensibilities. You, could do something entirely different.

I am still working on my USB Typewriter. I'll probably be finished with it today, but in the interim I found these two videos on Vimeo featuring a typewriter hack using car door lock actuators and then a profile of the guy who made the USB Typewriter kit.

Before you get too comfortable watching the videos, I want to remind you that today is the deadline for your the prompted questions: Where is the typosphere going? You can find out about the assignment and the reward for those that complete the challenge at this link:
http://www.magicmargin.net/2013/04/magic-margin-at-100000.html

Automatic Typewriter from Harvey Moon on Vimeo.  
Handmade Portraits: USB Typewriter from Etsy on Vimeo.

Deadline Ahead

 

The deadline for the Magic Margin 100,000 Page View Contest is days away. If you want to be one of the lucky few to receive a coveted limited-run Magic Margin poster, respond to the prompt in the post lined below.

http://www.magicmargin.net/2013/04/magic-margin-at-100000.html