The Best Laid Plans

I still need help.

The Maroon SM3 (pictured to the left) was in a rough-ish state. The carriage return lever struck the body, the carriage itself wouldn't move very easily, and the typebars were a little sticky. I was confident that I could take this machine and restore it to some semblance of it's former glory. At least, that was the plan.

The restoration started off well enough. I took my time and removed all the body panels. There was all manner of garbage hidden behind those panels. I took my time using penetrating oil to clean the mechanism. Everything loosened up and worked very well. Then, I tried to re-install the machine into the body panels.

For some reason, after the outer case was screwed down, the carriage refused to advance using the spacebar. That is not entirely accurate, the spacebar would advance as far as the next tabulator stop. The spacebar is actuing like a tabulator! I am sure that there is some small spring in the escapement that worked loose, but it's disheartening. The carriage was moving well before this little set-back. Back to the bench it goes.

I am sure that every typewriter enthusiast has a similar story. It's part of the learning process. Hopefully, I can get it working soon.